LFF Technology의 제품과 유사한 전기 자동차가 우리 거리에서 점점 더 흔해지고 있습니다. 주거용 충전소. 가스를 덜 태우면 오염이 줄어듭니다. 환경에도 좋지만 지갑에 더 많은 돈을 넣어둘 수 있는 쉬운 방법이기도 합니다. 하지만 전기 자동차로 무엇이든 하려면 먼저 연료를 채워야 합니다. 충전소에 들어가세요. 충전소는 전기 자동차가 배터리에 필요한 모든 전력을 공급하고 공급할 수 있는 특별한 장소입니다.
충전소에 제대로 작동하는 전압이 있고, 이 전압은 최소 수준으로 제공되어야 한다는 것을 알고 계셨나요? 배터리에 들어가는 전기 에너지의 양은 전압으로 측정됩니다. 너무 높으면 제대로 충전되지 않고 탱크에 주스가 없이 운전하게 될 수 있습니다. 이는 매우 실망스러울 수 있습니다. 또는 과도한 전압이 가해지면 자동차 배터리가 손상되어 문제가 발생합니다. 전기 충전소를 사용하는 방법과 동일한 전압을 사용하는 것이 중요한 이유입니다.
The voltage of the charging station is another factor that can impede your electric car from being juiced up faster. A low voltage at the charging station will in general increase your car's charge times. The same is true for the rest of them in turn, extending out that period before you get back on the road. Except, a high enough voltage then means your car charges at least twice as fast Another example: A 240-volt feeder can charge your car battery done on that discharges just 120V. And no need to wait for 2 hours after a discharge, which eliminated the 74% cycle time waiting around on previous adventures as you have already waited making your trip much faster.
충전소에 체크인하는 최종 목표에 도달하기 위해 많은 디지털 경로를 거쳐야 합니다(마지막 장면과 매우 유사). 그러나 전기 자동차에 맞는 전압을 제공하는지 확인하는 것이 필요합니다. 레벨 3 충전소 LFF Technology에서 제공합니다. 거의 모든 PHEV에는 일반 120V 가정용 콘센트에 꽂는 가정용 충전기가 있습니다. 그러나 가정용 충전기는 전기 자동차용으로 특별히 설계된 특수 충전소보다 전력이 낮은 경우가 많습니다. 다른 유형은 그렇지 않지만 일반적으로 모든 전기 자동차는 동일한 전압 레벨이 필요합니다. 최적의 충전을 위해 240볼트가 필요할 수 있습니다(또는 120볼트만 필요할 수 있음). 레벨 XNUMX 충전기로 충전할 수 있도록 자동차에 필요한 적절한 전압 정격을 알고 있는 경우에도 마찬가지입니다.
Because, you see — there is a risk your electric car could get compromised if connected to the wrong voltage. The car may not be fully charged if you try to charge at a power station with low voltage. I mean you could run out of power while driving not good at all. In contrast, a high voltage output could discharge and destroy the automobile battery. It can cause dangerous situations like fire hazards or overheating. So you should use, because The charging station, the same as LFF Technology's 온보드 충전기 전기 자동차 provides a certain voltage as needed for your electric vehicle.
충전소 자체도 시간이 지나면서 눈에 띄게 개선되었습니다. EV 충전기 사업 created by LFF Technology. However, your electric car could charge even faster if a new charging station is able to offer higher voltage than the old one. These car-filling stations will be able to modulate their voltage output - And do so with some of the largest charging units in place; as each vehicle takes power out from a charge. This removes the synergy, naturally driving down costs on material cost spent and available for consumer tech everywhere. The battery will not do any harm with this feature as it only provides the accurate voltage required for safe charging.
그리고 보너스로, 인프라에 더 많은 충전소가 업데이트되고 더욱 새로워질수록 LFF Technology와 마찬가지로 더 빠른 충전기가 제공됩니다. DC 급속 충전소. 이를 통해 자동차 배터리에서 끌어올릴 때 더 많은 에너지를 한 번에 공급할 수 있지만 결과적으로 전체적으로 전기 사용량이 줄어듭니다. 이는 환경에 좋은 소식인데, 에너지를 절약할 수 있을 뿐만 아니라, 이는 모두 대규모 매립지에 쌓이게 되며 지갑에도 도움이 됩니다. 전기 사용량 감소 - 충전소에서 사용하는 전력이 감소하면 모두가 절약할 수 있습니다.
Modular Charging station voltage allows remote OTA firmware updates as well as fault diagnosis; Compliant with the OCPP standardized cloud platform which seamlessly integrates any third-party operator system. The CAN/RS232 (485) interfaces enable connection to the existing IOT systems.
Adopting a dual circuit breaker layout, it will prevent devices from Charging station voltage, and reduce the risk of failures and safety hazards and operate safely in extreme conditions that range from -40 to +70 Celsius. It was certified by TUV.
Equipped with Bluetooth, WiFi, 4G communication module, the charging output is compatible with single/three-phase or multi output (Charging station voltage). The efficiency of charging is enhanced while labor costs and the average cost of equipment are cut down.
It combines Charging station voltage with aesthetics. It features bright sharp lines, and utilizes galvanized sandblasting and toughened glass. It is rated at IP54/IK08 level and boasts a long life and corrosion resistance.